RideNow TPU Inner Tube – Lightweight, Durable, and High-Performance
The Race Formula TPU Inner Tube redefines cycling with superior air retention, enhanced durability, and ultra-lightweight design. Designed for both racing and urban riding, it offers low rolling resistance, high impact resistance, and a seamless riding experience with reduced pressure loss over time.
Weighing as low as 19g, this next-generation TPU compound significantly cuts rotational weight, improving acceleration and climbing performance. Its flexible, puncture-resistant design ensures long-lasting reliability, making it a top choice for cyclists seeking peak efficiency.
Backed by RoHS, CE, MA, SGS, and GB certifications, the RideNow TPU tube meets global quality standards. Made from 100% recyclable TPU, it aligns with RideNow’s eco-friendly vision, delivering high-performance solutions while reducing environmental impact.
– Weight : 19g
– Size : Suitable for 700×18-32C tires
– Valve lenght : 65mm
– Transparent valve
– Compatible with disc brake wheels ONLY
– Long lasting
– Come with 2 glueless patches for each tube
Instructions for installation and use of RideNow inner tube
Step 1
Before installing the RideNow inner tube,check the inner wall of the outer tire, rim, spokeends, and rim tape for sharp objects that maycause puncture and tire burst.
Step 2
Even if tubeless wheel sets are used, rim tape of correct size should be used and installed correctly.
Step 3
Before inflating the RideNow tube, turn the valve inward (towards the center of the tire circle). Inflate a small amount until the innertube is round; this pressure should be less than0.5 bar/8 PSl. Before performing the following installation steps, the inner tube should be slightly inflated.
Step 4
Install the outer tire so that one side of the outer tire protrudes from the outer edge of the rim, and then insert the inner tube into the outer tire. Ensure that the inner tube is not twisted or squeezed between the rim and the outer tire. Ensure that the nozzle valve passes through the center of the rim nozzle hole and the rim is vertically aligned.
Step 5
Do not use any sharp or pointed tools to install the inner tube, as these tools may damage the inner tube or outer tire, resulting in air leakage after use or inflation. From near the air nozzle, pull the projecting side of the outer tire over the rim flange until the entire outer tire is fixed to the rim. Make sure that the outer tire does not squeeze the inner tube and the inner tube has no creases.
Step 6
Roll semi-inflated tire on the ground to release possible squeeze folds. Then slowly inflate the tire while ensuring that both sides of the outer tire are evenly fixed around the rim during inflation Be careful that the tire pressure does not exceed the maximum allowable pressure of rim, rim tape, and outer tire. Check the tire pressure before each ride. If the inner tube leaks or there is a repairable puncture hole, you can use the RideNow tire repair kit. Instructions for use are included, Do not repair the RideNow inner tube with any other tire repair products, Other inner tube patches do not adhere to the RideNow inner tube and would not prevent air from escaping from the puncture.
– Extremely low rolling resistance
– Lightweight and supple ride feel
– Excellent puncture protection
– Hookless and tubeless compatible
– Comfortable, even on rough roads
